Did you know that garage doors are a leading cause of fires? That’s because the springs on garage doors can snap in high-heat conditions. When that happens, it causes the garage door to fall and trap people inside. You can avoid this danger by taking care of your garage door. If you are looking for a local industrial garage door repairs Lombard, IL service that won’t break the bank, give Martin Garage Door a call today!
Industrial Garage Door Repairs Lombard, IL: Schedule Annual Maintenance!
No matter how well you maintain your garage door, it will eventually need to be replaced. The average lifespan of a door is 15 years. If you have an older door, you need to budget for a replacement soon. The best way to extend the life of your door is to have it maintained annually. A professional industrial garage door repairs Lombard, IL services will inspect your door and make any necessary adjustments. We will also clean the door and lubricate the moving parts. This will help your door operate more quietly and efficiently. If you wait until your door breaks to have it maintained, you will have to pay for two services: The initial installation and the repair of a broken door. If you maintain your door annually, you only pay once.
Industrial Garage Door Repairs Lombard, IL: Check Your Springs!
The springs are what open and close the door. You should test them every couple of months to make sure they aren’t loose or broken. If they are, you need to replace them. When you test the springs, lift the door until it stops. Then, let it drop. It should take between three and five seconds to fall all the way. If it takes less than three seconds, the springs are too tight. If it takes more than five seconds, they are too loose. You can also do a “squeeze test.” Squeeze the top and bottom of the springs with your hands. If they are loose, they will move together. If they are tight, they will move apart.
Commercial Garage Door Repair: Change Your Belt and Cables!
Your cables move the door up and down. Your belt moves the door side to side when you open it. Both of these parts will eventually break. You need to inspect them every year and replace them if they are worn. You can test your cables by lifting the door with both hands. If you can lift the door with one hand, the cables are worn. You can test your belt by trying to move the door with one hand. If it moves, the belt is worn. You should repair your cables and belt at the same time. They are designed to break at the same time, so if one is worn, so is the other. Replacing them at the same time will extend the life of your garage door.
Clean and Lubricate Everything: Do it Yourself!
Once a year, you should give your garage door a thorough cleaning. You don’t have to hire a professional to do it. All you need is a rag, some cleaning solution, and a bucket of water. Start at the top of the door and work your way down. Wipe away dirt, grime, cobwebs, and oil or grease from the tracks and pulleys. When you’re finished, pour water and cleaning solution into the bucket and swish the dirty water down the tracks. Let it sit for a few minutes, then pour the water out. This will clean all the dirt from the tracks. Once you’ve cleaned the tracks, pour a bit of lubricant into a spray bottle. Move the garage door back and forth a few times to coat the tracks. This will make the door move more smoothly.
Check Your Sensors: Clean Dirty Sensors!
Your sensors will turn the door off when it hits something. This is called a “stop” sensor. Some sensors are “reverse” sensors. They will turn the door back around when it hits something. Both types of sensors are prone to failure. Take a look at the sensors once a year. If they are broken, clean them. If they are dirty, repair or clean them. Moreover, if you don’t clean them, the dirt will build up and cause them to break. If you replace them when they are dirty, they are just putting off a new dirty sensor.
Check the Door Itself for Damage: Check Them Quickly!
Once a year, you should lift the door and look for any signs of damage. Lift the door manually, don’t let it fall. If it falls quickly, your springs need to be replaced. Look for cracks in the frame or the door itself. If you see cracks, replace the door. If you see broken parts, call a professional industrial garage door repairs Lombard, IL service to fix them. Moreover, if the door is dented or bent, you can have it repaired or replaced. But if the door is cracked, you need a new door. Cracks are a sign that the door is rotting and could fail at any time. Call our garage door repair person Lombard, IL experts.
Industrial Garage Door Repairs Locmbard, IL – Conclusion
Your industrial garage door is an important part of buiseness. It protects your house from intruders. If your garage door is broken, you need to repair or replace it as soon as possible. Call industria garage door repairs Lombard, IL services at Martin Garage Door. We can also offer electric garage door repairs Lombard, IL services and contact us.
